Swap a GM 14-bolt 1-ton rear axle into TJ
and eliminate the trackbar
Artec Industries is excited to announce the Triangulated TJ GM 14-bolt Axle Swap Kit. This heavy duty 3/8" and 1/4" truss is designed to take serious abuse and reinforce your entire axle. The accompanying brackets provide the OEM coil, lower control arm and shock locations, but triangulate the upper control arms which eliminates the need for a trackbar. He also offer this kit with a HIGH CLEARANCE option that raises the LCA and shock brackets above the bottom of the axle tube.
The GM 14-bolt rear axle offers huge improvements in every category over the factory Dana 35 and 44.
NOTE: This kit requires general welding and fabrication skills. Welding should only be done by a competent welder. Artec Industries implies no guarantees or warranties and is not liable for improper installation.
*Some grinding and fitment may be required when installing this kit. Every axle varies slightly and some fabrication may be required. Will require brake line relocation to fit.
We're working to restore these instructions from our previous website. Please bear with us. If you need immediate assistance, contact firstname.lastname@example.org.