DESCRIPTION
REVIEWS
Instructions
Warning: Installing this product requires Welding and Fabrication skills, If youare not confident in your abilities to complete this task please have thisinstalled at an qualified off-road shop .
Step 1.
Inventory all parts to ensure you have all of the correctpieces. If youare missing parts or the package is damaged Contact Artec Industries Immediately at (855) 278-3299 M-F 8:30-5pm MST If outside of those hoursEmail us at Sales@Artecindustries.com (Please include picture of part numberlabel on box as well as your invoice number Also keep the box and take picturesof the box per shipping carrier for a damage claim otherwise it could be denied)
Step 2.
Slip the PG1401-1 plate into the key ways on PG14xx-2 and tack weld into place
Step 3.
Using the 4 supplied bolts bolt the PG14xx-3 onto the PG14xx-2
Step 4.
Test fit the Pinion guard on the axle Depending on your pinion angle you may needto trim the PG14xx-3 bracket . Using a marker mark the top of the PG14xx-3 remove the pinion guard from the axle andtrim were needed . Prep the truss forwelding by removing any paint, rust, or grime.
Step 5.
Fully weld the PG14xx-1 & PG14xx-2 together , Nowweld the PG14xx-3 to the truss.
Step 6.
Paint all bare surfaces .