• MON-FRI 9am-5pm MDT • GET DIRECTIONS
    • +1 (855) 278-3299
    Raised Trackbar Bracket for 3.5" Diameter Front Axle
    Wishlist

    Raised Trackbar Bracket for 3.5" Diameter Front Axle

    Regular price $65.99 $56.09

    Save: $9.90 (15%)
    /
    In stock Place Backorder Sold out Order now, Only 1 left!
    Share :
    Ask A Question

    SKU : BR1139

    DESCRIPTION

    Raised Trackbar Bracket for 3.5" Front Axle

    This heavy bracket is designed to give you a universal trackbar mounting option for Dana 60 swap kits, especially those using our Low Profile Dana 60 Front Trusses. This bracket gives you several options to find the perfect geometry. The 1/4" thick CNC precision cut and formed components of this setup ensure a quality, heavy duty solution.
     
    NOTE: This bracket offers several raised trackbar holes. Every lift is different and some trial and error may be necessary to find the ideal ride. This bracket is NOT bolt on and requires welding. This bracket will also require modifying or fabricating a new trackbar itself since it will be slightly shorter. This bracket attaches to the axle next to the factory coil perch.

    Joint width is 1.65", so use our Narrow Misalignment Spacers with 7/8" Heims if you are building your own Trackbar.

    Features include:

    • 1/4" mild steel. Precision CNC cut and bent for great fitment.*
    • Perfect solution to accompany crossover/high steering on the Front Jeep axle.
    • Adjusts roll center higher for greater stability.
    • 3 holes of adjustment to find ideal geometry
    • Works great with  Artec Low Profile Front axle trusses
    • 3.5" axle tube diameter can be easily modified for larger tube diameters

    NOTE: This kit requires general welding and fabrication skills. Welding should only be done by a competent welder. Artec Industries implies no guarantees or warranties and is not liable for improper installation.

    *Some grinding and fitment may be required when installing this kit. Every axle varies slightly and some fabrication may be required.
    *Requires a custom Trackbar

     

    REVIEWS

    Customer Reviews

    Based on 5 reviews Write a review

    Instructions

    We're working to restore these instructions from our previous website. Please bear with us. If you need immediate assistance, contact sales@artecindustries.com.

    This part requires welding and fabricationskills if you are not confident in your abilities please take to an Off-roadshop to install this part.

     

     Warning: This part does not work with an off the shelf Track bar  A custom Track bar will need to be fabricated.

     

     Tools Required :

    Safety Glasses, Gloves, Socket Set, Wrenches, Jack, Jack stand, wheel chocks, Cutting Tool ofyour choice (Sawzall, Grinder, plasma, cutting torch)  Welder.

     

     Step 1:

    Inventory that you have all of the parts for your order If you aremissing parts or have incorrect parts contact Artec Industries Immediately @(855)-278-3299  M-F from 8am-5pm MST   If it is after those hours please EmailSales@Artecindustries.com

     

     Step 2:

    Place wheel chocks at the rear of the vehicle ,  Use a jack to lift the front of the vehicleand set  the front axle securely onto theJack stands.

     

     Step 3: 

    Remove your current track bar from the vehicle.

     

     Step 4:

    Use a wire wheel or flap disk to clean and prep the axletubes for welding .

     

     Step 5:

    Insert Br1139-2 tab into keyway cut out on partBr1139-1.  Once the tab is inserted intothe keyway insert your track bar joint into the bracket to adjust mountingwidth and tack weld the inner plate into place .

     

     Step 6: 

    Remove your track bar from the bracket and fully weld theinner part of the bracket into position.

     

     Step 7:

    Set track bar mount into position on the axle , Weld trackbar bracket into position.

     

     Step 8:

    Prime and Paint the bracket we get the best results withrustolem paint .

     

     Step 9:

    Measure the distance from Frame side track bar mount todesired mounting hole bracket and fabricate a new track bar,  Once the track bar is fabricated install itinto the vehicle. Lower the vehicle off of the Jack stands and take to analignment shop to have an alignment is performed to ensure the geometry iscorrect.

     

    Check bolts and nuts for tightness afterdriving about 50 miles if they are loose tighten the bolts.


    Raised Trackbar Bracket for 3.5" Diameter Front Axle

    Recently Viewed Products

    Also Available from these Distributors

    YOUR CART (0)

    No Products in the Cart