• MON-FRI 9am-5pm MDT • GET DIRECTIONS
  • 8.8 Truss BRIDGE

    SKU : TR8804

    Regular price $34.99 $31.49

    Save: $3.50 (10%)
    /
    Strengthen your Artec 8.8 truss with the 8.8 Truss Bridge to prevent axle tube spinning. This piece connects the truss to the axle's 3rd member. Ha... Read More
    Strengthen your Artec 8.8 truss with the 8.8 Truss Bridge to prevent axle tube spinning. This piece connects the truss to the axle's 3rd member. Hardware not included. Read Less

    Complete your build with

    8.8 Truss BRIDGE

    • Added strength to Artec 8.8 truss
    • Protects against axle tube spinning
    • Connects truss to axle's 3rd member
    • Increases resistance to tube spinning
    • Bolts to casting, welds to truss
    • May require trimming for pinion angle
    • Enhances truss performance and durability
    • Sold individually, hardware not included
    • Made in the USA

    Upgrade your Artec 8.8 truss with the 8.8 Truss Bridge for added strength and protection against axle tube spinning. This individually sold component connects the truss to the 3rd member of your axle, increasing resistance to tube spinning. The piece bolts to the casting and welds to the truss, potentially requiring trimming depending on your pinion angle. Enhance your 8.8 truss performance and durability with this essential addition. Please note, hardware is not included.

    Reviews

    Install Instructions

    THIS PART REQUIRES WELDING AND GENERAL FABRICATION SKILLS. ONLY COMPETENT WELDERS SHOULD ATTEMPT TO INSTALL THIS PART.

     

    Tools Required :

    Safety Glasses, Gloves, , Socket Set, Wrenches, Wheel chocks,  Cutting Tool of your choice (Sawzall, Grinder, plasma, cutting torch)  Welder.

     

    Step 1:

    Inventory that you have all of the parts for your order If you are missing parts or have incorrect parts contact Artec Industries Immediately @ (855)-278-3299  M-F from 8am-5pm MST   If it is after those hours please Email Sales@Artecindustries.com

     

    Step 2:

    Place wheel chocks at front wheels on vehicle ,  Jack up the rear of the vehicle and set securely on jack stands . 

     

    Step 3: 

    Set TR8804 pinion bridge against the truss and mounting flange on the axle. Bolt the flange to the axle if you are able to (Depending on your pinion angle you may need to trim the bridge to fit)    Weld the bridge to the truss . 

     

    Step 4:

    Raise vehicle and lower off of jack stands. 

     

     Check bolts for tightness after 50 miles re tighten if needed


    Install videos are coming soon.

    Community Discussion

    Recently Viewed Products

    YOUR CART (0)

    No Products in the Cart