SuperDuty Knuckle Full Hydro Weld On High Steer Arms (Pair)

Affordable weld on arms for the 05+ SuperDuty Knuckles to help eliminate those swap steering issues.

Fully fabricated for the best steering geometry and clearances
Engineered for best alignment of tie rod and hydraulic steering ram, providing maximum strength and longevity
Best used with our new Superduty 60 Full Hydro Ram Mount. LINK
Included Knuckle Bolts and tapered spacers for tight fit and increased strength
Welds directly to factory knuckles (2005 and up SuperDuty)
3/4" bolt holes for uncompromising steering strength
Precision Laser Cut from 1/4" steel and CNC Bent for accurate fitment
Minimal modification to OEM knuckle needed*

Sold in pairs only (DRIVER SIDE AND PASSENGER SIDE). Includes knuckle bolt kits (8" long bolt, sleeve and stover locking nut) and all internal gusseting.

Rod end bolts not included.

*Driver Side Knuckle hole will need to be drilled out to 3/4". Casting remnants on front of knuckle will need to be ground down. Knuckles from '05-'10 are slightly different than '11+ so we've etched a trim line on the laser cut part that will need to be trimmed off.

***Requires welding and minor fabrication. We highly recommend this kit only be installed by a competent welder.***

Full Hydro Weld-On High Steer Arms - 05+ SuperDuty